Omron V680 Series User Manual

RF Tag Installation Precautions
Section 11
Section 11
Appendices
303
RFID System
User's Manual
(Modbus TCP)
 Influence of Inclination
Install the Reader/Writer and RF Tags so that the Reader/Writer and RF Tags are as parallel to each
other as possible.
Communications will be possible even if the Reader/Writer and RF Tags are not parallel to each other;
however, the communications range is affected by the inclination between them as shown in the
following graphs.
 Rates of Change in Communications Range for Inclination of V680S-D2KF67M
 Measurement Conditions
RF Tag inclination (θ°)
0 10 20 30 40 50 60 70 80 90
V680S-HMD63-ETN and V680S-D2KF67M
(Metal at back surface: Steel)
0% -1% -4% -8% -15% -25% -50% --- --- ---
V680S-HMD64-ETN and V680S-D2KF67M
(Metal at back surface: Steel)
0% -1% -3% -7% -12% -21% -37% --- --- ---
V680S-HMD66-ETN and V680S-D2KF67M
(Metal at back surface: Steel)
0% -1% -4% -9% -18% -33% --- --- --- ---
• V680S-HMD63-ETN and V680S-D2KF67M
(Metal at Back Surface: Steel)
• V680S-HMD64-ETN and V680S-D2KF67M
(Metal at Back Surface: Steel)
• V680S-HMD66-ETN and V680S-D2KF67M
(Metal at Back Surface: Steel)
Non-metallic
material
Reader/Writer
RF Tag
Metallic material
Non-metallic material
Reader/Writer
RF Tag
Metallic material
Non-metallic material
Reader/Writer
RF Tag
Metallic material

Omron V680 Series Specifications

General

Brand	Omron
Model	V680 Series
Category	Other
Language	English