Confidential C
AST*-******
3 Start-up procedure
3. Start-up procedure
3.1. Start-up procedure
This article describes the steps for using Fieldbus of the ZW "EtherCAT", connecting the ZW
and TwinCAT (BECKHOFF).
＜What can be identified using this material＞
(1) How to set up confirmation to use the EtherCAT function
Confirmation of ZW and TwinCAT System Manager
Reference
This document is described for instructions on how to connect to establish communication. It
is not described
how to wire the operation of procedures other than connection, and
installation. This document is not also described with respect to the operation and function of
the device. Please refer to the instruction manual, please contact OMRON.
To Next Page
Loading...
Need help?
General
