Confidential C
AST*-******
Error! Reference source not found. Error! Reference source not found.
4. Configuration of EtherCAT
Please follow the steps below to set each device.
Installation Please refer to each hardware manual User's
Manual.
▼
Connection Please refer to each hardware manual User's
Manual.
▼
4.1. Hardware configuration of ZW Configure the hardware switch on the ZW.
▼
4.2.
Setting of TwinCAT
Setting of the EtherCAT communication using
TwinCAT.
▼
4.3.
Confirmation of communication
status
Confirmation of the communication status.
To Next Page
Loading...
