OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
20
Zero Position /Memory
Rinsing position /Last position
INSTRUMENT GENERAL FUNCTIONS
3.2.2.1. SPRAY
Spray is selected by pressing the button on the keyboard.
Spray is enable by pressing the pedal (A) while instrument is working (standard
configuration).
The water spray flow is adjusted by using the tap located under of that instrument, when turned counter-
clockwise, the flow of water to the spray is gradually reduced; when turned clockwise the flow is gradually
increase. Do not adjust the other settings close to the water tap.
To Next Page
Loading...
