OMS LINEA ESSE - Page 23

OMS LINEA ESSE S.T.01/3S ED.0 REV.14 03/2017
23
CURING LAMP
When Curing Lamp is selected by taking it out, the handpiece has also the buttons to control the lamp.
Note:
For further details refer to the manufacturer’s user manual of the curing lamp.
SYRINGE MODULE
The syringe can be use at any time by pressing one of the two buttons water or air (left-hand buttons for water
and right-hand buttons for air). When both buttons are pressed simultaneously, spray water is delivered.
The syringe can be installed (on request) on both, doctor console and assistant console. Available in three
versions: with 3 ways (air and cold water), 6 ways (air and warm water), 6 ways (air and warm water) plus light.
By rotating the bottom of the syringe. The green LED on the bottom of the syringe will show that warm water
is activated.
If the syringe is provided with light, it will turn on automatically while is used.
Note:
For further details refer to the manufacturer’s user manual of the syringe.