31
4.4.18 File Management
Select FILE on the main interface, and the following dialogue box will appear:
The system will automatically read the memory files. The file name and the work times will be listed and the
selected fi le will be previewed in the upper right corner. Diff erent memory fi les can be selected by using ▲ or ▼.
Press ENTER to preview the selected fi le on the main interface. Press ESC to close the preview.
Push
🡄
or
🡆
, and the light blue cursor can be moved left and right to switch between fi le column in the left and
item column in the middle. If the fi le is being previewed, the preview will be closed when switching to the item
column. When the light blue cursor is on the item column, push ▲ or ▼ to select the item and press ENTER to
activate the item. Press ESC to return to the main interface.
Items in the item column are as follows:
• Read Mem File: Reads the list of fi les in the system’s memory.
• Udisk+: Reads the fi le list of an inserted USB drive.
• Other+: Other operations involving the fi les in the system’s memory.
• Run: Runs the selected fi le.
• Track: Tracks the selected fi le, and the track mode is optional.
• Work Time: Forecasts the running time of the selected fi le.
• Clear Count: Clears the running times of the selected fi le.
• Delete: Deletes the selected fi le.
• Copy to Udisk: Copies the selected fi le to an inserted USB drive.
To Next Page
Loading...
Need help?
General
