Onicon FT-3500 - Unpacking and Verification; Checking Received Items

FT
-
3500 ELECTROMAGNETIC FLOW METER
ONICON Incorporated 727.447.6140 Page 13 onicon.com
SECTION 2.0: UNPACKING
The FT-3500 sensor, remote display, and cable will be packed together in one box. All other installation hardware and
peripheral devices will be packaged and shipped separately.
IMPORTANT NOTE: Sensor and Remote Display are calibrated together and matched by serial number.
Please open all packages with care to prevent damage to their contents. Carefully inspect each item for signs of damage in
transit. The ow meter stem should be straight and free of blemishes or abrasions. The sensor head should have a smooth
continuous surface that is free of abrasions.
All ONICON products are shipped insured unless the customer specically requests otherwise. Please notify the shipping
company and ONICON immediately if any items are damaged in transit. Save all packing material for inspection by the
shipper.
2.1 CHECKING THAT YOU HAVE RECEIVED EVERYTHING
• Quick Start Guide and Meter Conguration (hanging tag)
• Flow Meter Certicate of Calibration
• Transmitter Quick Start Guide
• Conguration Sheet
• FT-3500 Insertion Electromagnetic Flow Meter
• Adjustable Insertion Depth Gauge
• Installation Hardware Kit, if ordered. (separate box)
Please notify ONICON if any of the documents or meter components are missing.
If boxes were damaged in transit, please take photos immediately upon arrival, before unpacking the meters.
Then, also take photos of any obvious product damage and send all photos to CustomerService@onicon.com.