Onkyo CR-N765 User Manual

11
Names and functions of parts
Unless otherwise indicated, the operations described in
this manual are based on remote control operation. You
can also use the buttons on the unit that provide the
same functions as those on the remote control.
Remote control
Í button: Press this button to turn the unit on or put it
in standby mode.
DISPLAY button: Change the information shown.
DIMMER button: Use this button to switch the
display’s brightness between normal, moderately dark
and dark.
INPUT SELECTOR buttons: Use these buttons to
select the source.
CD button: Use this button to play a CD.
TUNER button: Use this button to listen to the AM/FM
radio. Each time you press this button, the radio
switches between “AM” and “FM”.
LINE button: Use this button to listen to music stored
on an external device through an analogue
connection. Each time you press this button, the input
setting switches among “AUX IN”, “LINE1” and
“LINE2”.
DIGITAL button: Use this button to listen to music
stored on an external device through a digital
connection. Each time you press this button, the input
setting switches between “OPTICAL” and “COAXIAL”.
NET button: Use this button to listen to the Internet
radio or to use your home network.
USB button: Use this button to listen to music on a
USB storage device or iPod/iPhone. Each time you
press this button, the input setting switches between
“USB(F)” (front panel) and “USB(R)” (rear panel).
Pause (;) button
Skip (:/9)/2 PRESET/PRESET 1 buttons
Search (6/5)/2 TUN/TUN 1 buttons
ENTER button: Use this button to confirm menu
selections and setting values.
Direction ( / / / ) buttons
MENU button: Press this button to display the menu.
TONE/BAL button: Use this button to adjust the tone.
MEMORY button
RANDOM button
Number buttons
Tray open/close (<) button
SLEEP button: Press this button to set the sleep
timer.
Playback (1) button
Stop (∫) button
RETURN button: Press this button to return to the
previous display.
VOLUME (3/4) buttons
MUTING button: Temporarily mutes audio.
REPEAT button
D.TUN/CLEAR button: Use this button to directly
input an AM/FM radio frequency or clear the
characters that you have input.
CR-N765_eng.book 11 ページ ２０１４年８月２９日 金曜日 午後２時１８分

Onkyo CR-N765 Specifications

General

Impedance	16 Ω
Receiver type	stereo
Output impedance	470 Ω
Input sensitivity	150 mV
4Ω speaker support	Yes
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (20-20KHz@8 Ohm)	22 W
HDMI in	0
Audio (L/R) in	2
Digital audio optical in	1
Connectivity technology	Wired
Speakers connectivity type	RCA
Audio formats supported	AAC, ALAC, FLAC, LPCM, MP3, WAV, WMA
Bluetooth version	3.0+HS
Bluetooth profiles	APT-X
RDS features	PS, RT
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Optical drive included	No
Display	-
Product color	Silver
Damping factor	58
Package weight	7 kg
Volume control	Rotary
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connector contacts plating	Gold
Package depth	309 mm
Package width	487 mm
Package height	232 mm
7000 g	Weight of the packaged product in gram.
Certification	CE, EAC, EMC
AC input voltage	220-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	75 W

Weight and Dimensions

Depth	331 mm
Width	215 mm
Height	119 mm
Weight	5000 g