8
Names and functions of parts
Front
Display
VOLUME control: Used to adjust the volume.
Í ON/STANDBY button: Press this button to turn the
unit on or put it in standby mode.
USB port: Use to connect an iPod, iPhone or USB
storage to the unit.
Phones jack: Turn down the volume, then connect
your stereo headphones to the Phones mini jack. The
speakers output no sound while the headphones are
connected.
Disc tray
INPUT button: Use this button to select the source.
TONE button: Used to adjust the tone.
Tray open/close (<) button
RETURN button: When a menu is displayed, press to
return to the previous menu.
Stop (∫) button
MENU/ENTER button, Skip (:/9) dial: Turn
clockwise to skip to later tracks or counterclockwise to
skip to earlier tracks. Turn to change the item or setting
value shown when a menu is displayed. Press to use
as the ENTER button to confirm settings. Press and
hold to use as the MENU button.
Remote control signal receiver
Playback/pause (1/;) button
CR-N765_eng.book 8 ページ ２０１４年８月２９日 金曜日 午後２時１８分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
