Onkyo CR-N765 User Manual

22
Listening to an iPod/iPhone
You can connect an iPod/iPhone to the USB port on the
front panel and play music files on it.
0 For information on supported iPod/iPhone, see
“Compatible devices/media/file formats”.
0 By default, the charging function for the USB port on
the front panel is enabled. For details on the charging
function and information on its setting, see
“SleepCharge” under “Menu settings” under “Various
settings”.
1. Press the USB button repeatedly to select “USB(F)” on
the display.
2. Connect the USB cable that comes with the iPod/
iPhone to the USB port on the front of the unit.
0 If “No storage” appears, reconnect the iPod/iPhone.
3. Press and hold the stop (∫) button to select the
playback modes.
Extended mode: Content information appears on the
display. In this mode, you operate the remote control of
the unit.
Standard mode: In this mode, you operate both the
iPod/iPhone and the remote control of the unit while
looking at the iPod/iPhone screen.
0 For information on remote control operation, see
“Playing tracks stored on a USB storage device”.
0 With some iPod/iPhone models and generations,
certain buttons may not work as expected.
∫ Menu items in Extended mode: When Extended
mode is selected, the following menu items appear on the
display. Use the direction ( / ) buttons to select the
menu and press the ENTER button.
Playlists  Artists  Albums  Genres  Songs 
Composers  Shuffle Songs  Now Playing
∫ Information shown on the display: Press the
DISPLAY button repeatedly
during playback in the
Extended mode to change the information shown on the
display.
Title  Artist  Album  Elapsed time of current track 
Playback time of current track  File format, sampling
rate and bit rate
∫ Random playback: Press the RANDOM button
repeatedly to select the random modes.
In Extended mode, the following icons appear on the
display:
: Plays all tracks in the selected folder randomly.
: Plays a randomly selected album when the selected
folder contains multiple albums.
0 To end the random playback, press the RANDOM
button repeatedly until the random icon disappears.
∫ Repeat playback: Press the REPEAT button
repeatedly to select the repeat modes.
In Extended mode, the following icons appear on the
display:
: Repeats all tracks.
: Repeats one track.
0 Repeat playback and random playback can be used
together.
0 To end the repeat playback, press the REPEAT button
repeatedly until the repeat icon disappears.
CR-N765_eng.book 22 ページ ２０１４年８月２９日 金曜日 午後２時１８分

Onkyo CR-N765 Specifications

General

Impedance	16 Ω
Receiver type	stereo
Output impedance	470 Ω
Input sensitivity	150 mV
4Ω speaker support	Yes
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (20-20KHz@8 Ohm)	22 W
HDMI in	0
Audio (L/R) in	2
Digital audio optical in	1
Connectivity technology	Wired
Speakers connectivity type	RCA
Audio formats supported	AAC, ALAC, FLAC, LPCM, MP3, WAV, WMA
Bluetooth version	3.0+HS
Bluetooth profiles	APT-X
RDS features	PS, RT
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Optical drive included	No
Display	-
Product color	Silver
Damping factor	58
Package weight	7 kg
Volume control	Rotary
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connector contacts plating	Gold
Package depth	309 mm
Package width	487 mm
Package height	232 mm
7000 g	Weight of the packaged product in gram.
Certification	CE, EAC, EMC
AC input voltage	220-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	75 W

Weight and Dimensions

Depth	331 mm
Width	215 mm
Height	119 mm
Weight	5000 g