Onkyo CR-N765 User Manual

17
Playing CDs
This unit can store up to 25 tracks in the memory.
1. When stopped, press the MEMORY button.
appears on the display.
2. Add tracks to the memory.
0 When using a music CD, use the skip (:/9)
buttons to select a track to store, and press the
ENTER button or playback (1) button to add the
track to the memory. You can also select tracks
using the number buttons.
0 When using an MP3/WMA disc, follow the
procedures in “Selecting tracks on MP3/WMA
discs”.
0 If you register tracks one after another, they will be
registered to the end of the memory.
Example: MP3/WMA disc
3. Press the playback (1) button to start playback.
∫ Checking the memory content: If you press the
search (6/5) buttons while a music CD is stopped, a
track number and the playback time appear. If you
perform the same operation while a MP3/WMA disc is
stopped, a folder number, file number and file name
appear.
∫ Clearing tracks from the memory: When stopped,
press the CLEAR button to remove the last track that was
added to the memory.
∫ Ending memory playback: When stopped, press the
MEMORY button.
0 Memory playback will also end if you press the tray
open/close (<) button to open the tray or put the unit
into standby.
With random playback, all of the tracks on the disc are
played in random order.
1. When stopped, press the RANDOM button.
appears on the display.
2. Press the playback (1) button to start playback.
∫ Ending random playback: When stopped, press the
RANDOM button.
0 Random playback will also end if you press the tray
open/close (<) button to open the tray or put the unit
into standby.
1. Press the REPEAT button repeatedly to select the
repeat modes.
The following icons appear on the display:
: Repeats all tracks.
: Repeats one track.
0 Repeat playback and memory playback/random
playback can be used together.
∫ Ending repeat playback: Press the REPEAT button
repeatedly until the repeat icon disappears.
0 Repeat playback will also end if you press the tray
open/close (<) button to open the tray or put the unit
into standby.
Memory playback
Program
number
File number
Folder number
Random playback
Repeat playback
CR-N765_eng.book 17 ページ ２０１４年８月２９日 金曜日 午後２時１８分

Onkyo CR-N765 Specifications

General

Impedance	16 Ω
Receiver type	stereo
Output impedance	470 Ω
Input sensitivity	150 mV
4Ω speaker support	Yes
Audio output channels	2.0 channels
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (20-20KHz@8 Ohm)	22 W
HDMI in	0
Audio (L/R) in	2
Digital audio optical in	1
Connectivity technology	Wired
Speakers connectivity type	RCA
Audio formats supported	AAC, ALAC, FLAC, LPCM, MP3, WAV, WMA
Bluetooth version	3.0+HS
Bluetooth profiles	APT-X
RDS features	PS, RT
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	40
Optical drive included	No
Display	-
Product color	Silver
Damping factor	58
Package weight	7 kg
Volume control	Rotary
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connector contacts plating	Gold
Package depth	309 mm
Package width	487 mm
Package height	232 mm
7000 g	Weight of the packaged product in gram.
Certification	CE, EAC, EMC
AC input voltage	220-230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	75 W

Weight and Dimensions

Depth	331 mm
Width	215 mm
Height	119 mm
Weight	5000 g