126
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Sleep Timer
You can allow the unit to enter standby automatically when the specied time has
elapsed. Press the SLEEP button on the remote controller, and select any of "30
min", "60 min" and "90 min".
"Off": The unit does not automatically enter standby mode.
You can also set this by pressing the button on the remote controller and
selecting "5. Hardware" - "Power Management" - "Sleep Timer" ( p174) on the
Setup menu.
To Next Page
Loading...
