Onkyo TX-RZ3400

18
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
- Connecting
Speakers
Connecting speakers
You can select the layout of speakers to be installed from various patterns when using this unit. Use the following ow chart to select the speaker layout that suits your
speakers and usage environment. You can check the connection method and default settings.
Yes No
Use height speakers?
 When using 1 set of Height Speakers
• 5.1.2 Channel System (
p57)
• 5.1.2 Channel System + ZONE SPEAKER
(
p58, 59)
• 5.1.2 Channel System (Bi-Amping the Speakers)
(
p60)
• 7.1.2 Channel System ( p61)
• 7.1.2 Channel System + ZONE SPEAKER ( p62)
• 7.1.2 Channel System (Bi-Amping the Speakers)
( p63)
 When using 2 sets of Height Speakers
• 5.1.4 Channel System (
p64)
• 5.1.4 Channel System + ZONE SPEAKER ( p65)
• 5.1.4 Channel System (Bi-Amping the Speakers)
( p66)
• 7.1.4 Channel System ( p67)
• 5.1 Channel System ( p48)
• 5.1 Channel System + ZONE SPEAKER ( p49)
• 5.1 Channel System (Bi-Amping the Speakers)
( p50)
• 5.1 Channel System (Bi-Amping the Speakers)+ ZONE
SPEAKER ( p51)
• 7.1 Channel System ( p52)
• 7.1 Channel System + ZONE SPEAKER ( p53,
54)
• 7.1 Channel System (Bi-Amping the Speakers)
( p55)
• 7.1 Channel System (Bi-Amping the Speakers)+ ZONE
SPEAKER ( p56)