15
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Front Panel≫ Rear Panel≫ Remote≫
Remote Controller
1. ON/STANDBY button
2. Input selector buttons: Switches the input to be played.
3.
DIMMER button: You can switch the display off or adjust the brightness of the
display in three steps.
4. Q (QUICK MENU) button: Pressing this button during playback can make
settings such as "HDMI" and "Audio" quickly on the TV screen. ( p180)
5. Cursor buttons and ENTER button: Select an item with the cursors, and press
ENTER to conrm your selection. Pressing / button allows you to switch
the screen when a music folder list or le list is not displayed on one screen on
the TV.
6. button: You can display advanced setting items on the TV and the display to
have a more enjoyable experience with this unit. ( p150)
7. LISTENING MODE button: Selects a listening mode ( p127).
8. CINEMA DEDICATED button: Sound quality can be improved by suppressing
the noise that is generated in digital circuits. ( p125)
9. TREBLE/VOCAL/BASS button: Adjusts the sound quality. ( p124)
10.
Play buttons: Used for playback operations for the Music Server ( p100)
or USB device ( p97). Also, switching to "CEC MODE" with "14. MODE
button" allows you to operate an HDMI CEC function-enabled AV component.
(Some devices may not be operated.)
11.
ZONE 2/ZONE 3 button: Used to control the multi-zone function ( p116).
12.
SLEEP button: Sets the sleep timer. Select the time from "30 min", "60 min"
and "90 min". ( p126)
13.
HDMI MAIN/SUB button: Select the HDMI OUT jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".
14.
MODE button: Switches between automatic tuning and manual tuning for
AM/FM stations ( p111). Also, when an HDMI CEC function-enabled
AV component is connected to this unit, you can switch "10. Play buttons"
between "CEC MODE" and "RCV MODE" (normal mode).
15.
MEMORY button: Used to register AM/FM radio stations. ( p113)
16.
button: Switches the information on the display and is used to operate RDS
( p115). Also, when the "BLUETOOTH" input selector is selected, pressing
and holding this button for 5 seconds or more will switch to the pairing mode.
17.
button: Returns the display to the previous state while setting.
To Next Page
Loading...
