Onkyo TX-RZ3400

155
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
Screen Saver 3 minutes Set the time to start the screen saver.
Select a value from "3 minutes", "5 minutes",
"10 minutes" and "Off".
 2. HDMI Input
Change input assignment between the input selectors and HDMI IN jacks.
Setting Item Default Value Setting Details
BD/DVD HDMI 2 (HDCP
2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the BD/DVD
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" rst.
GAME HDMI 1 (HDCP
2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the GAME
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" rst.
CBL/SAT HDMI 3 (HDCP
2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the CBL/SAT
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" rst.
STRM BOX HDMI 4
(HDCP 2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the STRM BOX
button. If you do not assign a jack, select "---". To
select an HDMI IN jack already assigned to another
input selector, change its setting to "---" rst.
PC HDMI 5 (HDCP
2.3)
"HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the PC button. If
you do not assign a jack, select "---". To select an
HDMI IN jack already assigned to another input
selector, change its setting to "---" rst.
CD --- "HDMI 1 (HDCP 2.3)" to "HDMI 6 (HDCP 2.3)":
Assign a desired HDMI IN jack to the CD button.
If you do not assign a jack, select "---". To select
an HDMI IN jack already assigned to another input
selector, change its setting to "---" rst.