Onkyo TX-SR701 - Selecting an Audio Component; Basic operation for selecting audio sources; Start playing the selected input source; Adjust the volume

Selecting an Audio Component
TX-SR7Ol/701E
I7° .....o ° 1,
k_J
MASTER VOLUME
Input source buttons
Basic operation
If you want to perfornl these operations using the remote controller,
first press the RCVR MODE bullon.
1. Press the desired input source.
TX-SR7Ol/7Ol E
RCVR
MODE
', ,'_' : INPUT SELECTOR
=__ _ buttons
• For information about selecting the listening mode, see pages
46-5 I.
• You can set the sound quality using the Audio At/just menu.
(See page 57 for more information.)
If no audio output is heard h-om the digital source (DVD, CD,
etc.) you have selected, see "Digital lnput" on page 52.
TX-SRdOl/dOl E
Remote controller
The selected source name appears on the display. See "Enjoying
DVD multichannel audio playback" (see page 44) when a DVD
player with a 5.1-channel input port is connected to the TX-
SR701/701 E/601/601E.
2. Start playing the selected input source.
lak)llowthe operating instructions for the source device.
3. Adjust the volume to an appropriate level.
TX-SR7Ol/701 E/d01/601E Remote controller
A_[justing the main volume adjusts the volume level of all the
speakers connected to the TX-SRT01/701E/601/601E together, if
headphones are connected, this also adjusts the volume heard from
the headphone speakers. To adjust the volume, either press the
VOL _ buttons on the remote controller or turn the MASTER
VOLUME dial. "lB increase the volmne, turn the dial clockwise; to
decrease the volume, turn the dial counterclockwise. The volume
can be set to Min, 1 to 99, and Max.
41