Oppo SonicaDAC - Using Sonica DAC in a Multi-Room Group; Reference; Specifications

To Next Page

To Previous Page

20



UsingSonicaDACinaMulti‐RoomGroup

IfyouhaveOPPOSonicaWi‐Fispeakersonyournetwork,itispossibletoaddSonicaDACasamember

toaSonicaspeakergroupformulti‐roomstreaming.ByconfiguringtheSonicaspeakersand SonicaDAC

into different groups, you are able to play the same music on multiple

 speakers simultaneously or

differentmusicondifferent speakers.UsetheSonicaapptoaddandremoveSonicaDACtoa group.



Note: If Sonica DAC is grouped with other Sonica speakers for multi‐room streaming, music will be

down‐sampledto44.1kHzor48kHzinorderto

meetthebandwidthlimitationsofthenetwork.Forthe

best audio quality, it is recommended that you remove Sonica DAC from a speaker group when not

usingthemulti‐roomfeature.

Reference

Specifications

Designandspecificationsaresubjecttochangewithoutnotice.

General

Dimensions(WxHxD) 10.0x3.0x12.2inches,254x76x360mm

Mass 10.4lbs,4.7kg

PowerSupply AC110‐120V~/220‐240V~50/60Hz

PowerConsumption 30W(operation),0.5W(standby)

TriggerInput 3.5V‐15V,10mAminimum

TriggerOutput 12V,100mAmaximum

OperatingTemperature 41°F‐95°F,5°C‐35°C

OperatingHumidity 15%‐75%Nocondensation

USBAudioInput(USBBType)

InputFormat StereoPCM,StereoDSD(DoPv1.1ornative)