Opticon NLV-4001 - 15.4 Default Setting (Part 3: Communication Settings); 15.4.1 USB Interface; 15.4.2 RS-232 C Interface

NLV-4001
2nd
26
SPECIFICATIONS MANUAL
15.4 Default Setting (Part 3: Communication Settings)
15.4.1 USB Interface
Item
Default
Send ‘Enter key’ after scanned data
Enable
Send ‘Tab key’ after scanned data
Disable
Send ‘Right arrow key’ after scanned data
Disable
Other
CDC/ACM compliant (USB-VCP)
*To use in USB-COM, OPTOELECTRONICS USB-COM driver needs to be downloaded.
15.4.2 RS-232C Interface
Item
Default
Baud rate
9600 bps
Parity bit
None
Data bit
8 bits
Stop bit
1 bit
Handshaking
No
ACK / NAK
No
CTS time out
Indefinitely
ACK / NAK time out
1 sec
Command header
ESC or STX
Command terminator
CR or ETX
Response to command
Disable