Opticon NLV-4001 - 3 Basic Specification

NLV-4001
2nd
2
SPECIFICATIONS MANUAL
Basic Specification
3
Item
Specification
Note
Control
Section
CPU
32 bit CISC
Core: 96 MHz
SRAM
96 KB
Flash ROM
512 KB + 32 KB
Interface
RS-232C
300bps to 115200bps
Default: 9600bps
USB
Full Speed 12 Mbps
Optical Section
Scan method
CCD linear image sensor
Light source
1 red LED
624 nm
Effective pixels
1500 pixels
View angle
Horizontal: about 50°
Technical specification
Symbologies
UPC-A, UPC-A Add-on, UPC-E, UPC-E Add-on, EAN-13, EAN-13 Add-on,
EAN-8, EAN-8 Add-on, Code 39, Tri-Optic, Codabar(NW-7), Industrial 2 of 5,
Interleaved 2 of 5, Code 93, Code 128, GS1-128, S-Code, MSI/Plessey,
UK/Plessey, TELEPEN, Matrix 2of5, Chinese Post Matrix 2of5, IATA, GS1
DataBar, GS1 DataBar Limited, GS1 DataBar Expanded, Code 11, Korean
Postal Authority code
Minimum resolution
0.076 mm (3 mil)
Code 39 PCS 0.9
Illumination LED on
Curvature
Radius ≥ 15 mm (JAN-8)
Radius ≥ 20 mm (JAN-13)
PCS 0.9, Illumination LED on
Depth of Field
Resolution (1.0)
85 - 500 mm
Code 39 PCS 0.9
Ambient light 300 to 500 lx
Illumination LED on
(Temperature: -5 to 50°C)
Resolution (0.5)
60 - 325 mm
Resolution (0.127)
60 - 160 mm
Scan angle
Skew
±65°(exc dead zone)
PCS 0.9 JAN-13
Resolution 0.26 mm
Illumination LED on
Pitch
±45°
Tilt
±25°
Wide bar code
110 mm width
Code 39 Resolution 0.2 mm
Illumination LED on
Minimum PCS
0.3 or higher
MRD 32% or higher
Scanning from LCD
screen
White brightness
30 cd/m2 or more
Illumination LED off
Contrast ratio
100:1 or more
Power
Section
Operating voltage
4.5 - 5.5 V: USB / RS-232C
(Rated voltage)
Operating current (*)
180 mA(Typ)
USB/RS-232C
Standby current (**)
50 mA(Typ)
(*) For the RS-232C, a D-sub 9-pin connector is connected to a host device.
(**) The current values may vary depending on the host device.