Version 1.2.4 - 2022-10-26 21Translation of original instruction
S275N | S275NV EN
S275N_S275NV_GB_3.fm
3.5 Assembly
CAUTION!
Danger of crushing and tilting.
Proceed with caution during the work described below.
The metal band saw must be fitted on the machine stand by at least 2 people.
3.5.1 Assembling the machine stand - V1
Fit the side panels of the machine stand.
Place the machine stand on an appropriate foundation.
Check if the underground of the metal band saw is level using a spirit level. Compensate
existing unevenness.
Fasten the machine stand to the ground.
Place the metal band saw on the machine stand.
To Next Page
Loading...
