Safety
Version 1.2.4 - 2022-10-26 15Translation of original instruction
S275N | S275NV EN
S275N_S275NV_GB_1.fm
The inspection prior to initial commissioning is not required if the operator receives confirmation
from the manufacturer or installer that the electrical systems and operating equipment comply
with the accident prevention regulations.
Permanently installed electrical systems and operating equipment are considered constantly
monitored if they are continually serviced by qualified electricians and inspected by means of
measurements in the scope of operation (e.g. monitoring the insulation resistance).
1.14 Inspection deadlines
Define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the Work
Safety Act. Also use the inspection intervals in the maintenance section as reference values.
To Next Page
Loading...
