Optimum 3300260 - Assembling the Machine Stand - V2; Fit Optional Levelling Disc SE2; Load Suspension Point

Version 1.2.4 - 2022-10-2622 Translation of original instruction
S275N | S275NV
EN
S275N_S275NV_GB_3.fm
3.5.2 Assembling the machine stand - V2
 Fit the side panels of the machine stand.
 Place the machine stand on an appropriate foundation.
 Check if the underground of the metal band saw is level using a spirit level. Compensate
existing unevenness.
 Fasten the machine stand to the ground.
 Place the metal band saw on the machine stand.
3.5.3 Fit optional levelling disc SE2
Only possible in conjunction with machine base V2.
3.5.4 Load suspension point
DANGER!
Danger of crushing and overturning. The metal band saw must be installed by several
persons.
SE2 (thread M12)