Pa
ge 11
DX17V GB
1.15 Disconnecting and securing the drilling machine
Switch off the drill with the main switch and lock it so it cannot be activated by unauthorised per-
sonnel or switched on by accident.
The main switch can be locked by removing the shift lever.
All machine parts as well as any dangerous voltages are switched off. Excepted are only the
positions which are marked with the adjoining pictogram.
1.16 Mechanical maintenance
Reinstall all protection and safety devices after any maintenance work once the work has been
completed.This includes:
covers,
safety instructions and warning signs,
grounding cables.
Check if they are working properly!
1.17 Electric
Have the machine and/or the electrical equipment checked regularly. Immediately eliminate all
defects such as loose connections, defective wires, etc.
Define and document the inspection deadlines for the machine in accordance with § 3 of the
Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the Work
Safety Act.
"Electrical connection“ on page 16
To Next Page
Loading...
