Optimum DX17V - Warming up the Machine

Pa
ge 17
DX17V GB
3.8 Warming up the machine
ATTENTION!
If the drill is immediately operated at maximum load when it is cold, it may result in
damages to the machine.
INFORMATION
To ensure a long service life of your drilling machine, we recommend that you do not exceed a
maximum rotation speed of 500 min
-1
during the first hour of operation. If the drill is cold, e.g.
immediately after having transported the machine, it should be warmed up at a speed of only
500 1/min for the first 30 minutes.