Optimum DX17V - Storage

Page 35
DX17V GB
The following items are also not subject to liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such
as e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors
Any services, which company
or one of its agents performs in order to fulfil any
additional warranty are neither an acceptance of the defects nor an acceptance of its
obli-gation to compensate. Such services do neither delay nor interrupt the warranty period.
Place of jurisdiction for legal disputes between businessmen is Bamberg.
If one of the aforementioned agreements is totally or partially inoperative and/or invalid, a
provision closest to the intent of the warrantor is considered agreed upon, which remains
within the framework of the limits of liability and warranty which are specified by this con-
tract.
6.3.1 Decommissioning
CAUTION!
Used devices need to be decommissioned in a professional way in order to avoid later
misuses and endangerment of the environment or persons.
 Unplug the main power supply.
 Disconnect the connecting cable.
 Remove all environmentally hazardous operating fluids from the used device.
 If applicable remove batteries and accumulators.
 Disassemble the machine if required into easy-to-handle and reusable assemblies
and component parts.
 Dispose of machine components and operating fluids using the intended disposal
methods.
6.4 Storage
ATTENTION!
Incorrect and improper storage might result in damage or destruction of electrical and
mechanical machine components.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport box.
 Fragile goods (Goods require careful handling)
 Protect against moisture and humid environment  "Environmental
conditions temperature“ on page 12
 Prescribed position of the packing case (Marking of the top surface -
arrows pointing to the top)