Page 36
DX17VGB
Consult company if the machine and acces
sories are stored
for more than three months or are stored under different environmental conditions than
those specified here .
6.5 Note regarding disposal / options to reuse:
Please dispose of your machine in an environmentally friendly way, not by disposing of the
waste not in the environment, but by acting in a professional way.
Please neither throw away the packaging nor the used machine later on, but dispose of them
according to the guidelines established by your city council/municipality or by the corresponding
waste management enterprise.
6.5.1 Disposal of new device packaging
All used packaging materials and packaging aids from the machine are recyclable and gener-
ally need to be supplied to the material reuse.
The packaging wood can be supplied to the disposal or the reuse.
Any packaging components made of cardboard box can be chopped up and supplied to
thewaste paper collection.
The films are made of polyethylene (PE) and the cushion parts are made of polystyrene (PS).
These materials can be reused after reconditioning if they are passed to a collection station or
to the appropriate waste management enterprise.
Only forward the packaging materials correctly sorted to allow direct reuse.
6.5.2 Disposing of the old device
INFORMATION
Please take care in your interest and in the interest of the environment that all component parts
of the machine are only disposed of in the intended and admitted way.
Please note that the electrical devices comprise a variety of reusable materials as well as envi-
ronmentally hazardous components. Please ensure that these components are disposed of
separately and professionally. In case of doubt, please contact your municipal waste manage-
ment. If appropriate, call on the help of a specialist waste disposal company for the treatment of
the material.
6.5.3 Disposal of electrical and electronic components
Please make sure that the electrical components are disposed of professionally and according
to the statutory provisions.
The machine is composed of electrical and electronic components and must not be disposed of
as household waste. According to the European Directive 2011/65/EU regarding electrical and
electronic used devices and the implementation of national legislation, used power tools and
electrical machines need to be collected separately and supplied to an environmentally friendly
recycling centre.
As the machine operator, you should obtain information regarding the authorised collection or
disposal system which applies for your company.
Maximum stacking height
Example: not stackable - do not stack further packing
cases on top of the first one.
To Next Page
Loading...
