EC - Declaration of Conformity
in accordance with the Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
distributor:
hereby declares that the following product
Product designation: Bench drill
Type designation: DX17V
Serial number: _ __ __ __ __
Year of manufacture: 20__
Manual bench drill with frequency converter for speed
control for workshops and industrial plants that
meets all the relevant provisions of the above mentioned Directive 2006/42/EC as well as other applicable
directives (below) including their amendments in force at the time of declaration.
The following additional EU Directives have been applied:
EMC Directive 2014/30/EC
Low Voltage Directive 2014/35/EC
The safety objectives meet the requirements of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN 12717:2001+A1:2009Safety of machine tools - Drilling machines
EN 60204-1:2006/AC: 2010 Safety of machinery - Electrical equipment of machines - Part 1: General
requirements
EN ISO 13849 - Safety of machinery - Safety-related parts of control systems
EN 1037:1995+A1:2008Safety of machinery - Prevention of unexpected start-up
EN ISO 14119 Safety of machinery - Interlocking devices associated with guards - Principles for design and
selection
EN 1837:1999+A1:2009Safety of machinery - Integral lighting of machines
EN 61800-3:2012-09 Adjustable speed electrical power drive systems + correction 1
EN ISO 12100:2010Safety of machinery - General principles for design - Risk assessment and risk reduc-
tion (ISO 12100:2010)
To Previous Page
Loading...
