OPTIMUM
MASCHINEN - GERMANY
Safety
Version 1.1.5 dated 2015-08-31Page 16 Original operating instructions
BF30VarioGB
1.13 Switching-off and securing the drilling-milling machine
Switch off the drilling-milling machine with the main switch before starting any maintenance and
repair works.
1.14 Using lifting equipment
WARNING!
The use of unstable lifting and load suspension gear that might break under load can
cause severe injuries or even death.
Check that the lifting equipment and load-suspension gears are of sufficient load
capacity and are in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability
Insurance Association or other competent supervisory authority, responsible for your
company.
Fasten the loads properly.
Never walk under suspended loads!
Positions of the signs on the drilling-milling machine
Img.1-6: Drilling-milling machine
To Next Page
Loading...
