Optimum Optimill F3 - Page 153

OPTIMUM
MASCHINEN - GERMANY
Version 1.0 dated 2015-5-27 Page 153Original operating instructions
F150 TC CNC GB
7 M - Code list, M functions
7.1 M-function for milling machines according to PAL
No. Function
M00 Programmed stop
M01 Selected stop
M02 Program end
M03 Starting the milling spindle in positive direction
(clockwise)
M04 Starting the milling spindle in negative direction
(anti-clockwise)
M05 Stopping the milling spindle
M06 Automatic tool change
M07
M08 Cooling lubricant pump ON
M09 Cooling lubricant pump OFF
M10
M11
M12
M13
M14
M15
M16
M17 Return from subroutine
M18
M19 Spindle stop in defined limit position
M20 Program end with resetting (Reset)
M21
M22
M23
M24
M25
M26 Clamp workpiece
M27 Loosen workpiece
M28
M29
M30
M31 Opening a lock
M32
M33
M34
M35
M36
M37
M38
M39
M40
M41
M42
M43
M44
M45
M46
M47
M48
M49
M50
M51
M52
M53
M54
M55
M56
M57
M58
M59
M60 Workpiece change
M61
M62
M63
No. Function