22 © Hypercom EMEA Ltd. 2011 Understanding your equipment
Access Points (M
4240
only, continued)
The M4240 can communicate one Access Point only, and an Access Point
can communicate with one terminal only. If you have more than one
M4240 terminal, you will be provided with a separate Access Point for each
terminal.
Please keep the following guidelines in mind when choosing an installation
location for the Access Point:
Do select a location close to an electrical power outlet.
Do select a location close to a telephone wall socket and/or network
connection point as required by your Access Point model.
Do select a location where there will be no physical obstructions
between the Access Point and the M4240 operating area
Do not install or place the Access Point on a metal or metallised
material surface.
It is best practice to mount the Access Point high on a wall, but you
may need to commission the installation of new power and telephone/
network connection points.
To Next Page
Loading...