© Hypercom EMEA Ltd. 2011 5
Safety information
Do not use if visibly damaged.
Do not apply power/operate below 0°C and above 40°C.
Do not store in an unpowered state below –20°C and above 60°C.
Do not expose to moisture and do not store or operate in high
humidity environments
Do not disassemble.
Do not incinerate or crush.
This product is not suitable for use in hazardous environments such
as petrol stations, chemical depots etc.
Keep out of reach of children and pets
Battery Module safety for the M4200
Recharge the battery module only with the Hypercom supplied
Power Supply or Charging Dock
Do not short circuit battery module contacts
Use only batteries supplied by Hypercom as a replacement.
Do not drop or impact
Do not disassemble, puncture or breach
Do not leave in direct sunlight
Do not moisten or throw into water
Keep any spare batteries in a cool, dark, dry place such as a
refrigerator.
Do not expose to fire or incinerate
Never expose to temperatures less than –20°C or greater than 60°C
You must dispose used or faulty batteries using either your local
battery disposal facility in accordance with local laws, or by return to
Hypercom. Do not discard with general waste and do not incinerate.
Insulate the battery module contacts with electrical tape prior to
disposal. This battery module is a lithium-ion battery.
Battery Module Guarantee
Unless the terms & conditions of your terminal supply differ, the
battery module is excluded from the any Hypercom terminal warranty
and is guaranteed for one year. If your battery module fails after this
period, you must purchase a replacement battery module from
Hypercom
Battery module performance does degrade over time and you will need
to purchase a replacement when the battery module performance
becomes unacceptable.
To Next Page
Loading...