34 © Hypercom EMEA Ltd. 2011
Setting the Merchant Password
You should change the merchant password to protect against potential
fraudulent usage of the terminal. Depending upon your terminal configura-
tion, you may be asked to enter this password to perform certain terminal
functions.
To change the merchant password, from the Idle screen press:
MAIN MENU
SETUP (you may need to press NEXT to get to the SETUP item)
PASSWD
CHANGE
Then enter the existing password (which for a new terminal will be 0000),
and then your own password; you will be requested to re-enter this pass-
word to check the entry.
It is recommended that you change this password to e new value every
three months.
If you forget your merchant password, please contact your helpdesk.
Please have your Terminal ID and Merchant ID available
To Next Page
Loading...