Using your terminal © Hypercom EMEA Ltd. 2011 61
Reports (continued)
Audit
Performing an Audit on the terminal will print out a report of each
transaction that has been put through the terminal since the last
Settlement. This can be used in the unlikely event of a Settlement error to
allow you to check transactions in the terminal‟s Batch against the
Merchant Copy of your receipts.
There are two versions of this report: Limited View and Full View. Both
views show transaction type, card type and amount.
Limited View shows only the last four digits of each card number.
Full View shows the full card number.
PLEASE NOTE: For compliance with the PCI Data Security Standard, you
must contact the helpdesk to access Full View.
Summary
Performing a Summary on the terminal will print out a report of the
amount and totals of each type of transaction performed for each Acquirer.
Reprint
This allows you to quickly reprint a copy of the last transaction receipt.
There are two versions of a reprinted receipt: Limited View and Full View.
Limited View shows only the last four digits of each card number.
Full View shows the full card number.
PLEASE NOTE: For compliance with the PCI Data Security Standard, you
must contact the helpdesk to access Full View.
Info
This report prints out a receipt displaying the settings in the terminal and
may be used if you need to contact the helpdesk.
PLEASE NOTE: The reports in this section are for optional usage and only
designed to help you keep track of your orders and accounts. These
reports are not a substitute for the Settlement procedure.
To Next Page
Loading...