34
*
DVD Projector
English
Signal
▀■ Frequency: Changes the display data frequency to match the
frequency of your computer’s graphic card. When you expe-
rience a vertical flickering bar, use this function to make an
adjustment.
▀■ Tracking : Synchronizes the signal timing of the display with
the graphics card. If you experience an unstable or flickering
image, use this function to correct it.
▀■ Horizontal: Adjusts the horizontal position.
▀■ Vertical: Adjusts the vertical position.
Reset
Choose “Yes” then “Enter” pressed, the display parameters on this
menu will return to their factory default settings.
The “Signal” sub menu
is supported under
the Analog RGB and
Analog YPbPr input
sources.
To Next Page
Loading...
