50
*
DVD Projector
English
6. Select the “Change” button under the “Monitor” tab.
7. Click on “Show all devices.” Next, select “Standard monitor
types” under the SP box; choose the resolution mode you need
under the “Models” box.
8. Verify that the resolution setting of the monitor display is
lower than or equal to 1280 x 1024.
If using a Notebook PC:
1. First, follow the steps above to adjust resolution of the com-
puter.
2. Press the toggle output settings. example: [Fn]+[F4]
If you experience difficulty changing resolutions or your monitor
freezes, restart all the equipment including the projector.
The screen of the Notebook or PowerBook computer is not
displaying your presentation:
If using a Notebook PC:
Some Notebook PCs may deactivate their own screens when
a second display device is in use. Each has a different way of
reactivating. Refer to your computer’s documentation for detailed
information.
Image is unstable or flickering:
Use “Tracking” to correct it. See page 34 for more information.
Change the monitor color setting on your computer.
Image has a vertical flickering bar:
Use “Frequency” to make an adjustment. See page 34 for more
information.
Check and reconfigure the display mode of your graphics card to
ensure compatibility.
Compaq=> [Fn]+[F4]
Dell => [Fn]+[F8]
Gateway=> [Fn]+[F4]
IBM=> [Fn]+[F7]
Mac Apple:
System Preference-->Display-->Arrangement-->Mirror
display
Hewlett
=> [Fn]+[F4]
Packard
NEC=> [Fn]+[F3]
Toshiba => [Fn]+[F5]
To Next Page
Loading...
