Optoma S310e - EDID Key-In Procedure (VGA)

S310e/X312
Condential
6-3
6-3 Setup Procedure
(VGA)
1. Connect all ports
(1) Connect P1 of xture with COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P2 of xture with VGA Port
of projector by VGA Cable.
(3) Plug Power Adapter to JP1 of xture.
(4) Hold on "power" button and plug in the
power cord, release the “power” button
until all LEDs solid on.(as right picture
shows).
6-4 EDID Key-In Procedure
1. Execute EDID Program
- Click "EDID" to execute EDID program.
VGA
Cable
RS232 Cable
P2
P1
Adapter
JP1