Need help?Do you have a question about the optris Xi 80 and is the answer not in the manual?
Describes the intended application of the optris Xi spot finder infrared camera.
Details the warranty period, terms, and conditions for product failures.
Lists the items included in the standard scope of supply for the Xi camera.
Provides guidelines on how to maintain the IR camera, including cleaning procedures.
Presents the different basic versions of the Xi-series cameras available.
Outlines the general technical specifications of the Xi cameras.
Details the electrical characteristics and interface specifications.
Provides detailed specifications related to temperature measurement capabilities.
Describes the optical properties and lens options for the camera.
Shows the physical dimensions and mounting details of the camera.
Lists and describes available accessories for the Xi camera.
Details the laminar air purge accessory for keeping the lens clean.
Explains the water cooling accessory for high ambient temperature applications.
Describes the optional shutter accessory for protecting the optics.
Details how to combine air purge, water cooling, and shutter accessories.
Explains the use of the outdoor protective housing for outdoor applications.
Overview of the process interface capabilities and connections.
Details the integrated process interface for Xi 80/410 models.
Details the process interface for Xi 400 models.
Shows the pin assignment for USB, Ethernet, and PIF on the Xi 80/410.
Shows the pin assignment for USB and PIF on the Xi 400.
Describes the optional industrial process interface for Xi 80/410.
Describes the optional industrial process interface for Xi 400.
Illustrates a fail-safe monitoring setup using a PLC.
Details options for extending the USB cable length for the Xi 400.
Explains the Ethernet interface capabilities and connection options.
Guides through setting up the Ethernet connection between camera and PC.
Describes how to operate the camera autonomously without a PC connection.
Explains how to use the hot-/coldspot function in autonomous mode.
Details the operation and control of the optional shutter system.
Explains how to configure settings for the shutter in PIX Connect software.
Lists the minimum system requirements for installing PIX Connect software.
Provides step-by-step instructions for installing and starting the software.
Explains the layout and components of the PIX Connect software interface.
Highlights the key features and capabilities of the PIX Connect software.
Defines emissivity and its role in infrared radiation measurement.
Explains methods for determining unknown emissivity values.
Discusses factors influencing characteristic emissivity.
To Next Page
General