optris Xi 80 User Manual

-8 -
1 General Notes
1.1 Intended use
Thank you for choosing the optris
®
Xi spot finder infrared camera.
The optris Xi calculates the surface temperature based on the emitted infrared energy of objects
[►8 Basics of Infrared Thermometry]. The two-dimensional detector (FPA - focal plane array) allows a
measurement of an area and will be shown as thermal image using standardized palettes. The radiometric
processing of the picture data enables the user to do a comfortable detailed analysis with the software
PIX Connect.
The Xi is a precise instrument and contains an extremely sensitive infrared detector and a high-
quality lens.
The alignment of the camera to intensive energy sources (e.g. devices which emit laser
radiation or reflections of such equipment) can cause an irreparable defect of the infrared
detector. This is also valid if the camera is switched off.
Such kinds of damages are excluded from warranty.
Read the manual carefully before the initial start-up. The producer reserves the right to change
the herein described specifications in case of technical advance of the product.

optris Xi 80 Specifications

General

Brand	optris
Model	Xi 80
Category	IP Camera
Language	English