optris Xi 80 User Manual

-72 -
5.1.1 Ethernet setup (Point-to-Point-Connection)
After connecting the Ethernet cable to the camera and the PC, the first thing you need to do is to make the
network settings on the PC.
The devices are delivered with the following factory settings:
• IP address camera: 192.168.0.101
• IP address PC: 192.168.0.100
• Port number: 50101
To do this, go to Control Panel and open the Network and Sharing Center. Go on LAN connection.

optris Xi 80 Specifications

General

Brand	optris
Model	Xi 80
Category	IP Camera
Language	English