EasyManua.ls Logo

Optus X Smart - Getting Connected; Internet Connectivity

Optus X Smart
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
6
Getting connected
Your phone can connect to the Internet using either GPRS/EDGE/3G/4G or
Wi-Fi.
6.1 Connecting to the Internet
6.1.1 GPRS/EDGE/3G/4G
The first time you turn on your phone with your SIM card inserted, it will
automatically configure a mobile network service: GPRS, EDGE , 3G or 4G.
If the network is not connected, you can turn on mobile data in Settings >
Data usage.
To check the network connection you are using, touch the Application tab
on the Home screen, then go to Settings > More > Mobile networks > Access
Point Names or Network operators.
To create a new access point
A new mobile network connection can be added to your phone with the
following steps:
1 Touch on the Quick settings bar to get to Settings.
2 Touch More > Mobile networks > Access Point Names.
3 Then touch to add new APN.
4 Enter the required APN information.
5 When finished, touch and Save.
To activate/deactivate Data roaming
You can connect or disconnect to a data service according to your needs
when roaming:
1 Touch on the Quick settings bar to get to Settings.
2 Touch More > Mobile networks > Data roaming, choose a roaming mode,
to disable it.
3. When data roaming is disabled, you can still perform data exchange with a
Wi-Fi connection (see 6..1..2 Wi-Fi”).
To set preferred network mode
1 Touch on the Quick settings bar to get to Settings.

Related product manuals