Attach Tool-less Slide-Rail Assemblies
2.
Starting with either the left or right side of the rack, align the rear of the slide-
rail assembly against the inside of the rear rack rail, and push until the assembly
locks into place with an audible click.
3.
Align the front of the slide-rail assembly against the outside of the front rack rail,
and push until the assembly locks into place with an audible click.
4.
Repeat Step 1 through Step 3 to attach the slide-rail assembly to the other side
of the rack.
Related Information
■
“Install Mounting Brackets” on page 30
Installing the Storage Server Into a Rack 37
To Next Page
Loading...
