Oracle StorageTek T10000

Request Sense Command
August 2016 Commands 197
6 28 00 Not ready to ready transition (medium may have changed)
29 00 Power on or reset occurred
2A 00 Parameters changed
2A 01 Mode parameters changed by another host
2A 02 Log parameters changed by another host
2A 03 Reservation pre-empted by another host
2A 04 Reservations released by another host
2A 05 Reservation pre-empted by another host
3F 01 Microcode has been changed
7 26 10 Data decryption key fail limit reached
27 00 Write protected (and a write-type of command was attempted)
27 80 Unable to overwrite data
2A 13 Data encryption key instance counter has changed
30 05 Cannot write medium - incompatible format
74 01 Unable to decrypt data
74 02 Unencrypted data encountered while decrypting
74 03 Incorrect data encryption key
74 04 Cryptographic Integrity Validation Failed
8 00 05 End-of-data detected
14 00 Recorded entity not found (no EOD, but tape appears to be blank).
B 00 06 I/O process terminated due to errors
11 00 Unrecovered read error during FCP-2 recovery
47 00 SCSI parity error (retries not successful)
48 00 Initiator detected error message received
49 00 Invalid message error
4A 00 Command phase error
4B 00 Data phase error
4B 83 Command timeout
4B 84 Re-selection timeout
4E 00 Overlapped commands attempted
D 00 02 End-of-partition/medium detected (unable to write all data to tape)
00 04 Beginning-of-partition/medium detected
E 10 05 Logical Block Protection Method error
TABLE 3-147 Sense Key with ASC and ASCQ (Continued)
Key
Byte
Description12 13