Security Protocol In Command
208 T10000: Interface Reference Manual August 2016
Parameter Value
AVFMV Algorithm valid for mounted volume
0 = Not valid or no volume mounted
1 = Valid
SDK_C Supplemental decryption key capable
0 = Not supported
MAC_C Message authentication code capable
0 = Not supported
DELB_C Distinguish encrypted logical block capable
1 = Drive can distinguish encrypted data from unencrypted data when
reading from the media
Decrypt_C Decryption capable
10b = Drive can decrypt using this algorithm in hardware
Encrypt_C Encryption capable
10b = Drive can encrypt using this algorithm in hardware
AVFCLP Algorithm valid for current logical position
00b = Algorithm valid regardless of logical position or no volume is
loaded
NONCE_C Nonce capable.
01b = Drive generates nonce values
VCELB_C Volume contains encrypted logical blocks capable
0 = Drive can determine that volume contains encrypted data when
the volume is mounted
UKADF U-KAD fixed (Unauthenticated Key-Associated Data)
0 = Not fixed length
AKADF A-KAD fixed (Authenticated Key-Associated Data)
0 = Not fixed length
Maximum Unauthenticated
Key-Associated data bytes
001Eh
Maximum Authenticated
Key-Associated data bytes
0000h = Not supported
Key size 0020h = Device uses 256 bit keys
To Next Page
Loading...
Need help?
General