Verify Command
230 T10000: Interface Reference Manual August 2016
Fixed Block mode
0 = Variable block
1 = Fixed block
Verification Length Number of bytes or blocks to verify
SILI: Suppress Illegal Length
Indication
Suppress Illegal Length Indication
0 = Check condition status is returned if the record length does not
match Verification Length.
1 = Return Check Condition status only when the actual record
length is larger than Verification Length, and the Mode Sense block
length field in not zero.
Note – This option is not allowed if the fixed bit is 1.
Parameter Value
To Next Page
Loading...
Need help?
General