Oracle StorageTek T10000

Inquiry Command
August 2016 Commands 51
Product Revision:
8 byte ASCII field
For example: 4XX1YY where XX=02 and YY=03 (402103)
indicates:
• Model number for T10000D = 4,
• Major Revision = 02,
• Released code = 1,
• Minor release = 03
These 6 characters will be left justified with blank fill as
needed.
This field will change with each drive firmware release.
VS: Vendor Specific Vendor Specific
0 = Not supported
Key Management (KM) 0 = None
1 = Key Management Station (KMS) Version 1
2 = Key Management System (KMS) Version 2
4 = Data Path Key Management (DPKM) Spin/Spout
Encrypt: Encryption Encryption:
0 = Not encrypting drive
1 = Encrypting drive
LibAtt: Library Attach Library Attachment:
0 = Drive is not attached to a library
1 = Drive is attached to a library
VolSafe: VolSafe available 1 = VolSafe enabled
A Sun StorageTek write once, read many (WORM) technology
to designated tape cartridges.
DCMP: Data Compression 0 = Data compression is disabled
1 = Data compression is enabled
CSL:
Cartridge Scratch Loader installed
0 = CSL is not installed
Version Descriptor Standards supported by this device:
• 0000h = Empty
• 0077h = SAM-3_ANSI_INCITS.402:2005
• 0314h = SPC-3_ANSI_INCITS.408:2005
• 0403h = SSC-3 T10/1611-D Revision 04a
• 0A11h = FCP-3_ANSI_INCITS.416:2006
Parameter Value