Oracle StorageTek T10000 - IP Address Lo Submenu; Net Mask Hi Submenu

View or Change TCP/IP Settings
4-18 StorageTek T10000 Tape Drive Operator's Guide
2. For each digit:
a. Press Select to increment the flashing digit until the desired value appears.
b. Press Menu to set.
If you attempt to enter a value greater than 255 in either trio, all digits flash when
the last digit is set.
3. Press Menu to advance to the next submenu; or, press Select to restart the change
mode.
Note: If all digits flash, press either Select or Menu to clear; then,
press Select to restart the change more.
Net Mask Hi Submenu
Note: Manufacturing ships all drives with static Net Mask Hi set
to 255.255 .
Operator panel window shows NMhaaa.bbb .
Valid entries are 000-255 for each digit trio.
Defaults to the last saved selection.
Procedure:
1. Do one of the following actions:
a. Press Menu to bypass.
b. Press Select to start the change mode.
2. For each digit:
a. Press Select to increment the flashing digit until the desired value appears.
b. Press Menu to set.
If you attempt to enter a value greater than 255 in either trio, all digits flash when
the last digit is set.
3. Press Menu to advance to the next submenu; or, press Select to restart the change
mode.
Note: If all digits flash, press either Select or Menu to clear; then,
press Select to restart the change more.
Net Mask Lo Submenu
Note: Manufacturing ships all drives with static Net Mask Lo set
to 255.000 .
Operator panel window shows NMlccc.ddd .
Valid entries are 000-255 for each digit trio.