SAMPLE ANALYSIS - CONCENTRATES
11. Invert the syringe so that the bubble floats to the tip. Depress the plunger to
remove the air bubbles and get the syringe volume to exactly 10ml. A tissue may
be used to catch any excess solvent.
NOTE: It is important to ensure the syringe has exactly 10ml of solvent for
accurate results.
12. Add contents of syringe to vial and place cap firmly on vial. Press forward arrow
on screen.
13. FOR EXTRACTS GREATER THAN 35% ONLY: repeat steps 11 and 12 twice more
so that a total of 30ml is in the sample vial.
To Next Page
Loading...