SAMPLE ANALYISIS- WET FLOWER
3. Select the stage of the plant. Select “vegetative” for early stage plants before
flowers appear on the plant. Select “flowering” for plants nearing harvest.
4. Enter the moisture content of the sample to be run. If the moisture is not known,
enter 0 to continue. For THC/CBD ratio testing, we recommend entering 0 and
not drying the plant. For quantitative analysis, we recommend either analyzing
the moisture content using a gravimetric moisture meter or drying the sample to
0% moisture. A food dehydrator or a short time in a microwave are options for
quick drying times.
5. Add sample tags to the sample record if desired. These tags will be saved along
with the sample results and can be accessed later.
To Next Page
Loading...