ORBCOMM ST 9100

To Next Page

To Previous Page

ST 9100 - INSTALLATION GUIDE

1.6.1 Connect the Cables 21

1.6.2 Mount the Transceiver 22

1.7 Connect to Power 23

1.7.1 CAN bus Connection 24

1.8 (Optional) Attach the Terminal Shroud 24

1.8.1 Disconnect the FAKRA Connector 26

1.9 Register the Terminal 27

1.9.1 Activate the Terminal 27

1.10 API 28

APPENDIXA Troubleshooting the Terminal 29

A.1 Terminal Does Not Register or Report 29

APPENDIXB Satellite Antenna Dimensions 30

APPENDIXC Transceiver Dimensions 31

APPENDIXD Terminal Shroud Dimensions 32

APPENDIXE PIN Connections 33

APPENDIXF Cleaning Instructions 35

APPENDIXG Blunt-Cut Cable 36

APPENDIXH Field Installable Connector 38

Proprietary

Main Page

Legal Notice2
Trademark Notice2
Export Control Statement2
Contact Information3
Contact Customer Support3
Table of Contents4
List of Figures6
List of Tables6
Preface7
Purpose7
Notation7
Reference7
Battery Safety Warnings7
Installation9
Getting Started9
Prepare for the Installation9
Shipping Box Contents9
Additional Materials9
Required Tools10
Transceiver Identification10
Install the SIM Card10
Figure 1: Remove SIM Card Door11
Figure 2: Remove any Existing SIM Card11
Figure 3: Sample SIM Card Orientation11
Reset Button12
Figure 4: SIM Card Installed12
LED Location and Operation13
LED User Control13
Figure 5: LED Location13
Determine a Suitable Mounting Location14
Standard Satellite Antenna Mounting Guidelines14
Cellular Antenna Mounting Guidelines15
Mount the Antennas15
Screw Mount15
Figure 6: Antenna Cable Bend Radius15
Cable Tie Mount16
Side Connector Mount16
Bottom Connector Mount16
Figure 7: Drill Mounting Hole17
Figure 8: Attach Cable to Transceiver18
Figure 9: Apply Silicone to Hole in Asset18
Cellular Antenna19
Route the Main Cable19
Figure 10: Sample Cellular Mounting Locations - Automobile Example19
Protect the Cables and Cable Connectors20
Figure 11: Sample Cable Placement in a Vehicle Cab20
Connect the Cables and Mount the ST 910021
Connect the Cables21
Figure 12: Cable Management21
Mount the Transceiver22
Connect to Power23
CAN Bus Connection24
Optional) Attach the Terminal Shroud24
Figure 13: Terminal Shroud25
Disconnect the FAKRA Connector26
Register the Terminal27
Activate the Terminal27
Figure 14: Disconnecting the FAKRA Connector from the Transceiver Unit27
Api28
APPENDIX A Troubleshooting the Terminal29
Terminal Does Not Register or Report29
APPENDIX B Satellite Antenna Dimensions30
APPENDIX C Transceiver Dimensions31
Figure 15: Transceiver Top View31
Figure 16: Transceiver Side View Dimensions31
APPENDIX D Terminal Shroud Dimensions32
Figure 17: Terminal Shroud Top View32
Figure 18: Terminal Shroud Side View32
APPENDIX E PIN Connections33
Figure 19: Cable View of Connector33
Table 1: Electrical Pin Assignment33
APPENDIX F Cleaning Instructions35
APPENDIX G Blunt-Cut Cable36
Figure 20: Cable View of Connector36
Figure 21: Transceiver View of Connector36
Table 2: Blunt-Cut Cable Electrical Pin Assignment37
APPENDIX H Field Installable Connector38
Figure 22: ST 9100 Field Installable Connector38
Figure 23: Connector Front View38
Table 3: ST 9100 Field Installable Connector Details38

ORBCOMM ST 9100 - Page 5

Table of Contents

Other manuals for ORBCOMM ST 9100