Oriental motor BLVM620K-GFS - Setting Contents of MEXE02; MEXE02 Data Update Timing

Setting contents of MEXE02
−53−
11 Setting contents of
MEXE02
Functions of the product can be extended by setting the operation data and parameters using the
MEXE02
.
[
MEXE02
Operation data setting window]
[
MEXE02
Parameter setting window]
11.1 Timing to update data when the setting is changed
When parameters are written to the driver, they are saved in the non-volatile memory. The parameters saved in the
non-volatile memory are stored even after the power supply is turned o. When a parameter is changed, the timing to
update the changed value varies depending on the parameter. See the following four types.
•
Update immediately .............................................Recalculation and setup are immediately executed when the parameter
is written.
•
Update after operation stop ..............................Recalculation and setup are executed when the operation is stopped.
•
Update after executing conguration ............Recalculation and setup are executed after conguration is executed.
Conguration is executed using the
MEXE02
or communication.
•
Update after turning on the power again .....Recalculation and setup are executed after the power is turned on again.

Notation rules
In this chapter, each update timing is represented in an alphabet.
A: Update immediately
B: Update after operation stop
C: Update after executing conguration or turning the power again
D: Update after turning on the power again